Your house is the place where you build your life and make memories.
This is the major reason why it is hard to even imagine your house ever suffering from a disaster like a fire.
Losing the house to fire is, needless to say, a scary thought, however, there are many things to be done for preventing fire before it begins as well as keeping the family and house safe.
Most of the people know about the basics of preventing fire damage at home, like installing smoke alarms, not leaving the cooking unattended or beware of the burning candles, as well as keeping the fire extinguisher.
Below-mentioned are some major tips on how to prevent fire damage in your house –
- Inspect all the heating sources – Ensure the fact that air filters are thoroughly cleaned out, and in case you are using a space heater, it should be positioned away from anything flammable.
- Test the smoke detectors – Appropriately maintain the smoke alarms through testing batteries once a month.
- Remove the lint from a dryer filter after every use – The clogged filters as well as lint traps make the dryer less productive, reduce the needed airflow for keeping heat from building up in the vents, as well as force the lint onto heating coils.
- Never leave the food unattended while you are cooking as it is one of the topmost causes of the home fires. Burning the food can be the major reason behind smoke damage as well. In case you are not in the kitchen, make sure to turn off the elements as well as be aware while cooking with oils or grease.
Fireproof the house
It is essential to do everything in your power for reducing the risk of having a fire in the home. It involves checking everything from bedrooms, garage, kitchen, living room, chimney and roof.
- In case you smoke in the garage, ensure the fact that no flammable material is present nearby.
- Do not smoke in the home at all.
- In case you are smoking outside, make it a point that there is no flammable debris that might catch fire from the spark.
Keep the oven and stove clean
Not only food particles are the reason behind a house fire. A pot that is not set right on the burner correctly can cause melting of the pot handle if exposed to the stove flames or, if you leave the cookbook or dishtowel near the hot burner that can also catch fire.
Maintain the electrical cords
Check the electrical cord’s condition regularly and watch out for the frayed wires.
In case you have the chimney, make sure to get it cleaned frequently. When the chimney is not cleaned, it can start accumulating creosote which is highly flammable as well as can become the reason behind a chimney fire.
Also during winters, you must make it a point that the heating appliances are not located near anything combustible.
The process of water damage restoration is thoroughly regulated to make sure that properties destroyed by sewer or flood events can be efficiently restored to the safe space for the building occupant as well as that workers stay protected during cleanup. Water damage that is caused by flooding can turn out to be catastrophic for the homeowner. The reason behind flooding might be burst pipes, heavy rains, sewer back-up, and malfunctioning of the household appliances etc.
It could be a confusing time for deciding what to do next about paying for the price of repair and cleanup. Irrespective of the water damage’s cause, it is vital to feel that you are in control as well as have an idea of what is to be done if the unexpected happens.
Below-mentioned are some steps that the homeowners usually forget after a water damage –
- Wear protective clothing – Such as a pair of gloves and rubber boots before re-entering the house.
- Switch off the power – Needless to say, electricity and water don’t mix. However, in case turning off the power needs you to stand in or enter wet areas, it would be sensible of you to leave it alone as well as calling an electrician.
- Safeguard precious items – Lift the wooden furniture off the carpeted areas which are flooded as well as put the tin foil beneath the furniture’s feet for avoiding carpet staining.
- Avoid getting sick by making sure to completely washing glasses, flatware, and dinnerware which could have been caught in the home flood before you utilize the same again.
Dry out the House
Even in case you successfully remove all of the standing water from the house, everything might remain wet and damp, specifically, in case, there is high humidity in the area. In case you have the power, utilize the central air conditioning for assisting in eliminating humidity, as well as keeping the system fan on, not auto but, “on” position.
Call your Insurance Provider
Your house insurance might help in covering destruction caused by the water damage, as per the policies you have.
Decide what to keep and what not to keep
Look for what can be fixed as well as throw away those items which are no longer secure to use or are too damaged.
You might need to replace the flooring, fix the broken items, and repair the walls and if you do not have enough time to do all this, ensure the fact that you reach out to a reliable water damage restoration expert.
Expert water damage restoration contractors and companies have the capabilities and training for being able to effectively, economically, and safely undertake the repairing process of water damage. In case you are doubtful of what would be the first steps for the home repairs, it is suggested to go for a reputed water damage restoration company that has expertise and experience in water damage repairs.
After a hurricane blows through as well as heavy rains retreat, your issues might be just starting.
Water damage can instantly result into mold that causes grave health concerns.
Whether you are allergic or non-allergic to molds, its exposure can irritate the skin, eyes, throat, lungs, and skin.
Mildew and mold can begin growing within 24 hours after the flood, as well as can slink throughout a house, from the crawl spaces and basement to the attic.
The most suitable defense is to dry, clean or, as the last resort, dispose of the damaged items.
What are the steps for preventing mold growth?
1. Immediately dry the areas.
2. After cleaning as well as drying, stay sensitive to the musty odors in the impacted area.
3. Check the exterior of buildings and homes daily for the accumulation of groundwater.
4. Remove the damaged materials.
How long should the dehumidifier stay running after the flood?
Possibly, run the dehumidifier until the porous surfaces in your space have completely dried out.
It can take anywhere from 3 days to 1 week for drying out the flood-damaged building.
Materials such as insulation and plaster will take a very long time to get dried, so replacing them entirely might be a better option.
Until everything gets dried, mold can keep damaging the building.
How to prevent mold in your kitchen?
You should –
• Turn off specific appliances in case you witness moisture on the windows as well as other surfaces.
• Utilize exhaust fans for moving moisture outside (not into the attic) while you cook, clean, or wash dishes.
• Empty as well as clean the refrigerator drip pans, if needed.
What kills the mold after a flood?
In terms of killing mold after a flood, your first choice should be to go for commercial mildew and mold removers.
If you want, you can also choose tri-sodium phosphate (5 Tbsp. every gallon of water) or washing soda.
Last but not the least, the solution of water and bleach can also be picked (1-quarter cup of the laundry bleach per gallon of water).
Make sure to use proper precautions as well as security equipment for the mold remediation process while cleaning with tri-sodium phosphate, bleach or any other heavy-duty cleaners.
What to do for preventing mold in crawl spaces and basements?
1. Make sure that the crawl spaces are well-ventilated by having vents installed in the outside walls and using fans if required.
2. Put plastic covers over the dirt in the crawl spaces for preventing moisture from coming in from the ground.
3. Contemplate painting the concrete floors as well as utilizing area rugs rather than wall-to-wall carpet in the basements.
4. Get the basement floor checked for any cracks as well as have them repaired, if necessary.
In case you are replacing drywall, consider picking the board that contains moisture and mold inhibitors.
A lot of people are sensitive to this issue and it can prove to be a major health issue.
Ensure the fact that you stay cautious while checking for mold specifically if it is your first time dealing with water inside your building or home.
Water cleanup which includes soaked carpet, drywall, and pad can usually be restored as well as won’t require replacement. It results in the lower associated prices for the loss, and it permits the occupants for returning to their normal life with far less interruption and much faster.
After a flood, it is imperative for drying water-damaged contents and properties as rapidly as possible. Gone are those days when the contractors for water damage restoration had few alternatives available to them while performing their job. Today, the “science of drying” has been better significantly. With the help of modern equipment, one can restore the water damaged contents and properties with minimum intrusion.
How LGR dehumidifiers help in the Water Damage drying process?
Utilizing LGR dehumidifiers, the technician can decrease relative humidity to as minimal as 10%. These tools hold the ability to remove a maximum of 16 gallons of water from the air every day. The older dehumidifiers were capable of reducing the humidity to just 40%, eliminating about 5 gallons of water regularly. This disparity displays a huge improvement in efficacy, which results in quicker drying times i.e., 24-48 hours as compared to 4 days or more than that with the older equipment.
Why is it recommended to use advanced drying tools for the prevention of mold?
Thanks to instant drying, mold as well as other fungi has a lot less time for development. This aids in reducing possible health issues, like allergic reactions and respiratory discomfort, which can be caused by fungal contamination. Along with this, mold can also weaken the structural materials, like wood framing and drywall, to a point where they should be replaced. Utilizing advanced dehumidification systems eliminates moisture and thereby assists prevent mold growth. With a bit of or no moisture present, mildew and mold either don’t start or die very rapidly.
Why you should get the help of professionals rather than doing the same on your own for Water Damage?
One of the major mistakes made by homeowners are attempting to manage water damage on their own. Now, the problem is that they do not have the appropriate tools to take out all moisture from inside their homes or commercial space. Even when they believe that they have removed it all, a lot of it remains in those places where they can’t see, such as inside walls or under carpets. Hiring experts help in preventing this from happening. The problem of water damage is an ever-increasing issue for those people who reside in the flood plain areas. Thanks to the Internet, plenty of online water damage repair firms provide advanced drying methods that return houses and businesses to normal in just a matter of time.
What are some of the latest drying technologies for Water Damage?
The latest drying technologies include – 1. Desiccants 2. LGR Dehumidifiers 3. Rescue Mat Systems 4. Intra-wall Drying
Other advantages of instantly removing moisture include prevention of the irreversible swelling in the porous materials like wood and paper, shrinkage in fabrics (like drapes and upholstery), damage to the electronic equipment and rust on the metals.
Have you ever found yourself in a situation where you experience water leakages from pipes in your house? What might have been the cause and how did you deal with it? This is among the few problems most residential people encounter in their homes. It is a cause from the bursting of frozen pipes. This is a problem especially during the winter season in Chicago.
During the winter season, water pipes in vacant houses tend to clog the plumbing system. These, in turn, cause bursting of the system that result in spillage. To rectify such damages, it creates loose in cost and time. You will also need knowledge about water damage restoration, emergency flood cleanup, water removal services, and sewage cleanup. Such information you can always get from expert plumbers. The average cost of pipe repair would not be below $2, 500. This article will give you tips on how to prevent pipes from freezing in vacant houses.
1. Set Your Thermostat accordingly
It is essential that you set your thermostats to at least 50 degrees Fahrenheit. These will prevent water from freezing. Having that this is just a general recommendation, there still is a need to adjust the temperatures with time as per the change in seasonal weather. When the temperature goes too low, raise the temperature thermostat to at least 55 degrees Fahrenheit. It is advisable to consult an expert in plumbing to help you with this if required.
2. Increase Insulations around Pipes
Attics and basements of pipes commonly come with insulations around them. You need to pay special attention to these areas and if possible increase the insulation where required. You can use a unique form of a sleeve made from fiberglass or foam rubber. These two work best for insulating your pipes.
3. Prevent Draft around Pipes
It is good to always check for any draft especially in the attic and basements. If you feel any, immediately seal it since it lets in air that condenses your pipes. Also, note that cracks in houses let air in the house that exposes your pipes to cold hence causing freezing. Keep your pipes warm always.
4. Keep Doors inside House Open
Keeping doors open inside the house causes free air movement. When interior doors are kept open hot or cold air dissolve leading into a homogenous air condition. Also if you have pipes inside cabinets, it is good to keep them open as well. All these ensure a harmonized air condition in the rooms hence no freezing can easily erupt.
5. Drain pipes
You need to turn off water from the meter area. By doing these help avoid chances of leakages in flowing water. It is also crucial to drain off water in all pipes and let them stay dry. Dry pipes will not experience freezing due to the lack of water expansion.
6. Install Alarm and CCTV Cameras
Responding to an emergency case requires something that will quickly notify you when it happens. In this case, it is good to install an alarm in your house. An alert will inform you of any spillage from burst pipes. Also, a CCTV camera will help you in monitoring. You will on a daily basis take a look on CCTV footage about the condition in your house and act accordingly. Further, if you are not available, it is good to have a trustful person to make a quick checkup in all the rooms and report the feedback to you. These can be done once or twice in a week.
7. Keep garage Doors Closed when not in use
Sometimes the garage door seems to be an extension of the living space, but it’s an outdoor space that can let in extreme cold if not monitored. Keep your garage doors closed when not in use, and you can even buy a device called a TTC, it’s time to close, which will automatically close your garage door if left open for the pre-set amount of time. Any person, experiencing and paying the cost to repair burst pipes and clean the house, realizes that it’s very annoying and inconvenient. It is therefore vital to prevent such expenses through proper home and water pipe management.
If you are a homeowner and you are facing a problem of flooding or water damage, you must be considered about the growth of mold into your house. Avoiding it for a long period of time can help grow the mold, expand it, damaging the structure and furniture of the building and cause health-related issues. This microscopic fungus doesn’t need a huge amount of water to grow. Even the amount as small as a cup of water is enough to help it grow at the surface. Flooding or power outage due to a storm provides a perfect environment to these little organisms to grow.
It is highly important to make sure no excess water is left on the floor after any of such events. Fans, sweeping materials, and bleach will be the only tools you need to clean and prevent health problems. Follow these six steps provided and recommended by ServiceMaster QSR, a reputable emergency water and mold damage cleanup and restoration service in Chicago, to help your home stay mold-free.
Quick Removal of Excess Water: You can take several measures to clean the excess water on the floor. A vacuum cleaner is one of the best tools which can be used to clean the water on the floor effectively. You can also take a piece of cloth; the size may depend upon the amount of water, and absorb the water. This will help you save the cost of a vacuum cleaner and will ensure the removal of the excess water. However, it will require a lot more efforts.
Make A Use of Fans: Fans can also be used to dry the excess amount of water wetting the floor. Switch on the fan at full speed to clean it as soon as possible in order to avoid any unwanted situation. If the situation is with a carpet, it might take 6 hours for a fan to dry it. However, this is the best and the cheapest way to dry a carpet to avoid mold.
Dehumidify the Room: Dehumidifying is a technique of cleaning the moist in the room to provide cold and clean air to the person sitting in it. This step will help you in making sure that all the water has been removed and the surface of the material is purely dry. If will also prevent water from storing in any other area of the room which you failed to locate.
Steam-Cleaning: Steam cleaning is a technique to clean the thick material and make it germ-free. Steam cleaning can be used in a situation to clean all the germs, deodorize the carpet and cleans any moist left behind. The padding damaged by the water can easily be replaced. It is wise and cost-effective to change the padding instead of the whole carpet.
Sanitization: Sanitization must be done on wall, surface, and furniture in order to avoid any chance of growth of bacteria. Use a mixture of cleaning bleach and water to clean the surface of the materials which are at a higher risk of growing mold. Such a step will prevent you and your family from any health-related issue which might be caused by the germs left behind.
Check Underneath the Furniture: After taking all the measures, it is highly necessary to check underneath the furniture in case some amount of water might have swept under it. If you forget to do this step, there is a high chance you will face the mold problem as the dark and moist will provide a perfect environment for these bacteria to grow. You may notice it after a long period of time as the furniture are not moved frequently in a house. Therefore, remember to take this step after cleaning everything.
Such steps are mandatory to be taken in order to mitigate mold, especially if your area is always at high risk of flooding. Moreover, if you find it troubling to follow the above-mentioned steps, you can always take the services of ServiceMaster QRS to make the job easier for you. The professionals of the company will provide you ease while making your house mold-free at a highly affordable price.
When it comes to naturally occurring disasters, floods take the top spot for causing the most damage, and they can be expected in areas near large bodies of water. However, even when they are supposed to come, and specific measures have been taken against them, it can still be one of the greatest tragedy humans have to face in their lives when they arrive. Not only do they destroy the homes and streets and affect the livelihoods of millions of people, but they also leave emotional trauma in their wake. They can be very devastating and leave lasting affects in a person’s life such as an immense fear of water and more.
However, even though they are so terrifying, floods can be recovered from with some effort. Emotionally, it takes time to get over the damage caused by the event, but you can take care of the practical aspect sooner. Even if healing the trauma immediately is out of your hands, handling the other part is a matter that you can quickly solve. If you’re a flood victim and have survived a terrible flood, you may be confused about the next step to take after this life-changing experience. You might be wondering whether you should contact a general contractor or a water damage specialist to help you and what decision you need to take. However, this is a common problem among flood victims and can easily be resolved. Have no worries as we’re here to help:
Commercial office cleaning requires a particular process or checklist to ensure that the business infrastructure is maintained and serviced thoroughly to increase life of assets as well as project a professional and tidy look to potential clients. Commercial office cleaning entails a variety of different services none of which can be neglected.
A tidy and clean office is necessary for a number of different reasons. A clean office makes for ideal working conditions and resonates a positive impression on all who enter the office. Cleaning an entire office can be tiring and draining in light of the fact that a general office area is quite large. Thus, it is difficult to ascertain whether all areas have gotten the cleaning attention that they need and there are no signs of residue and spider webs in neglected areas of the office. Commercial cleaning is considered as a time consuming process as it requires copious amounts of work that an office or maintenance staff person cannot hope to achieve. There are a number of services which come under the term ‘commercial cleaning’ including; Floor Cleaning, Carpet Cleaning, Upholstery Cleaning, Air Duct Cleaning and Odor Removal.
A perfect and clean house is necessary for a number of reasons. It makes living arrangements wonderful and influences individuals to welcome it when they visit your place. A perfect house is constantly better to live for the inhabitants. Cleaning a whole house can be tiring and depleting in light of the fact that no one needs to spend their extra planning searching for residue and spider webs at each edge of their home. Residential cleaning is considered as a time taking process as it requires maximum energy from household individuals. There are a number of services which come under the term ‘residential cleaning’ including; Estate cleaning, hoarder cleaning, floor cleaning, carpet cleaning, upholstery cleaning, air duct cleaning and odor removal.
It has been observed that households find it difficult to manage the process of residential cleaning as maximum time, energy and specialized tools are required. For such purposes, there are a number of companies who offer residential cleaning services in order to share household responsibilities. Companies hire professionals to make sure that clients are delivered with the best quality residential cleaning services. As a household person, it is your responsibility to ensure that the process of residential cleaning is executed in a proper manner.
Burst pipes, overflowing gutters, flood-inducing rains and water seepage often cause water damage in residential homes. If left unchecked, this can lead to massive structural damage, loss of possessions and contamination in the form of mold. Sever backup and pipe burst can happen in areas of the house that are not visible to the naked eye. These are perhaps the worst kind of leaks as it not only damages the foundations of the house but also leads to water contamination, which can often be a much more serious problem than the water damage itself.
Mold is perhaps the least desirable thing someone could hope for in their homes. Once water is contaminated, it facilitates the growth of mold that can seriously increase the cost of remediation as it requires specialized equipment and training to have mold permanently removed. The existence of mold in homes can lead to serious health risks and even diseases if left unchecked. If they are any signs or early indications of mold existing anywhere in a residential or commercial property it is important that experts are contacted immediately before the issue exponentially increases.